The iCare HydroSense is an active temperature management system that circulates temperature-controlled water through a pad or body attachment to keep you at your ideal temperature throughout the night or during rest.

Unlike passive cooling products, the HydroSense actively adjusts and maintains a set temperature — cooling when you're warm and heating when you're cold. It's used for heat sensitivity caused by multiple sclerosis, diabetes, kidney disease, reduced mobility, inflammation, menopause, and other conditions that affect temperature regulation.

How it works

Water is pumped from the control unit through medical-grade silicone tubes in the pad or body attachment, adjusting to your selected temperature before returning to the reservoir. The system runs continuously to maintain your set temperature throughout your sleep or rest period.

Key features

• Active temperature control: cools to 8°C, heats to 48°C
• 80 watts — uses less power than a standard light bulb
• Whisper quiet motor
• Built-in timer — set from 1 to 12 hours
• Sleep mode for automatic temperature regulation
• Touch screen control panel with Celsius/Fahrenheit display
• Recommended operating range: 20°C to 35°C to reduce condensation
• Input voltage: AC220V / 50-60Hz
• Noise level: under 45dB
• Warranty: 2 years

What's included

• HydroSense control unit
• Pipe connector
• Plastic water release key
• User manual

Compatible accessories are available separately in our HydroSense range — including bed pads, body wraps, cuffs, and straps for targeted temperature management across different areas of the body.

Suitable for

• Multiple sclerosis and heat sensitivity
• Diabetes-related temperature dysregulation
• Kidney disease
• Reduced mobility and inflammation
• Menopause and night sweats
• Post-surgery recovery temperature management
• Anyone who overheats or gets too cold during sleep

Care and maintenance

Clean control unit exterior with a damp or electrostatic cloth every 2 weeks. Do not use chemical agents or dry cloth. Do not pour water into the control unit. If not in use for extended periods, drain water from the unit and pad completely. Store in a cool, dry place.

Delivery

Delivered via courier. Contact us if you have questions about setup or compatibility with your existing bed or accessories.

WILL IT FIT?
✔ Works with the full iCare HydroSense range — bed pad, mattress pad, lumbar strap, leg & foot cuff, back & shoulder vest and head & limb wrap
✔ Connect two attachments at once using the HydroSense Dual Function Splitter
✔ Extend the reach to your bed or chair with the HydroSense Extender Hose
✔ Standard pipe connector — pads and attachments click straight in
✔ Runs on ordinary household power (AC220V / 50-60Hz, 80W)
✔ Best placed on the floor in a 20-35°C room to reduce condensation

Input voltage: AC220V 50-60Hz | Cooling: to 8°C | Heating: to 48°C | Power: 80W | Noise: under 45dB | Timer: 1-12 hours | Warranty: 2 years | Recommended range: 20-35°C

The HydroSense actively circulates temperature-controlled water through a pad or body attachment to keep you at your ideal temperature. Used for MS, diabetes, menopause, post-surgery recovery, and anyone who struggles to regulate body temperature during sleep or rest.

Q: Do I need to buy a pad separately? A: Yes — the System Unit circulates temperature-controlled water but requires a pad or body attachment to deliver that temperature to you. Choose from the HydroSense accessories range based on where you need temperature management.

Q: How noisy is it? A: Under 45dB — quieter than a normal conversation.

Q: Can it both heat and cool? A: Yes — it cools to 8°C and heats to 48°C. Allow at least 5 minutes when switching between modes.

Q: Is it safe to use all night? A: Yes — the built-in timer and sleep mode are designed for overnight use. Recommended temperature range is 20-35°C for extended periods.

Q: What conditions is it used for? A: MS, diabetes, kidney disease, menopause, reduced mobility, post-surgery recovery, and general heat sensitivity or night sweats.